Note:
If no password was specified, memory reception mode is canceled.
5. Enter the password, and then press the Select key.
Memory reception mode is canceled.
Note:
If faxes are saved in memory, printing of the faxes begins.
Specifying Forwarding Settings
1. Press the u or d key to select UTILITY, and then press the Select key.
Note:
For details on selecting a menu, refer to "General Procedure for Specifying Settings in Utility Menu"
on page 13.
2. Press the u or d key to select FAX RX OPERATION, and then press the Select key.
3. Press the u or d key to select FORWARD, and then press the Select key.
The FORWARD setting appears.
4. Press the u or d key to select ON or ON(PRINT), and then press the Select key.
5. Enter the destination, or select from the speed dial destinations.
Note:
❏ To select from the speed dial destinations, press the Addressbook key, type in the speed dial
number, and then press the Select key.
❏ An e-mail address can also be specified.
6. Press the Select key.
The forwarding settings are specified.
AcuLaser CX16NF
Facsimile User's Guide
Control Panel and Configuration Menu
16