Epson Aculaser CX16NF User Manual page 71

Error message
Check Fax Mode
DESTINATION SET
BY MANUAL UP TO 16
DUPLICATE SETTING
FAX DATA LOST
HANG UP THE PHONE
LINE PROBLEM
CHECK LINE
MEMORY FILE FULL
MEMORY FULL
NOT AVAILABLE
NOT FAX NO.
Cause
A fax error occurred while an
operation was being performed
in Copy mode or Scan mode.
More than 16 recipient fax
numbers have been typed in
directly.
Same destinations are specified
by registered dial.
Data stored in the memory has
been erased.
The receiver of the connected
telephone is lifted.
❏
The telephone dialing
system or telephone wiring
system is not set correctly.
❏
The telephone cable is not
attached correctly.
The number of items registered in
the memory has exceeded the
maximum allowed.
❏
While sending a fax, the size
of the data for the scanned
image has exceeded the
capacity of the memory.
❏
While receiving a fax, the size
of the data for the scanned
image has exceeded the
capacity of the memory.
The menu cannot be set.
When the destination for the scan
data was specified, an e-mail
address registered in the favorite
list or as a speed dial destination
or group dial destination has
been selected.
AcuLaser CX16NF Facsimile User's Guide
Solution
Press the Fax key to check the error condition,
and take appropriate measures.
Specify no more than 16 recipient fax
numbers.
Specify the destination address again.
Check the printed lost data report. If
transmission data was erased, scan the
transmission data again. If received data was
erased, have the fax sent again.
Replace the receiver of the connected
telephone on the hook.
❏
Check the telephone dialing system or
telephone wiring system and use the
appropriate configuration menu to make
the correct settings.
❏
Correctly connect the telephone cable.
If MEMORY RX MODE is set to ON, cancel memory
reception mode, and print received
documents stored in the memory.
❏
If MEMORY RX MODE is set to ON, cancel
memory reception mode, and print
received documents stored in the
memory.
❏
Send the fax manually.
For details on the menu settings, refer to
"UTILITY Menu" on page 13
Directly type in the destination for the fax data,
or specify a fax number registered in the
favorite list or as a speed dial destination or
group dial destination.
Troubleshooting 71