Epson Aculaser CX16NF User Manual page 28

Hide thumbs Also See for Aculaser CX16NF:
Table of Contents

Advertisement

❏ Using the favorite list (including group dial destinations): Press the Addressbook key, press
the u or d key to select the number of the desired speed dial or group dial destination, and then
press the Select key. Then, press the Select key again.
❏ Using speed dial numbers: Press the Addressbook key 2 times, use the keypad to type in the
number of the desired speed dial destination, and then press the Select key. Then, press the
Select key again.
❏ Using group dial numbers: Press the Addressbook key 3 times, use the keypad to type in the
number of the desired group dial destination, and then press the Select key. Then, press the
Select key again.
❏ Using the address book: Press the Addressbook key 4 times, and then use the List function or
Search function to search for the desired destination. (For details, refer to "Using the List
Function of the Phone Book" on page 25 or "Using the Search Function of the Phone Book" on
page 26.) Then, press the Select key.
4. To add a destination, check that ADD is selected, and then press the Select key. Repeat step 3 until
all desired destinations are specified.
❏ To finish specifying destinations, select FINISH, and then press the Select key.
❏ To check the specified destinations, select CHECK/EDIT. After checking the destinations, press
the Back key.
❏ To delete a destination, press the u or d key to select the destination to be deleted after
selecting CHECK/EDIT to check the destinations, and then press the Stop/Reset key. When a
message appears, requesting confirmation to delete the destination, select YES, and then press
the Select key to delete the destination. After the destination is deleted, press the Back key.
Note:
The Addressbook key can be used if Can Use AddressBook is displayed.
5. Press the Start key.
The document is scanned, and then the fax is sent.
Note:
To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation to
cancel the setting. Select YES, and then press the Select key. If this is done, all selected recipients are
cleared.
AcuLaser CX16NF
Facsimile User's Guide
Sending Faxes
28

Advertisement

Table of Contents
loading

Table of Contents