Epson Aculaser CX16NF User Manual page 59

Note:
For details on selecting a menu, refer to "General Procedure for Specifying Settings in Utility Menu"
on page 13.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select GROUP DIAL, and then press the Select key.
The GROUP DIAL screen appears.
4. Use the keypad to type in the group dial number (1-20), and then press the Select key.
Note:
❏ For details on entering/editing numbers, refer to "Entering Text" on page 74.
❏ If the destination is already registered with the specified group dial number, REGISTERED!
appears. Press the Back key to return to the DIAL REGISTER screen, and then continue with step
3.
5. Enter the name of the group dial destination to be registered, and then press the Select key.
Note:
❏ Text up to 20 characters long can be entered for the name.
❏ For details on entering/editing text and the characters that can be entered, refer to "Entering
Text" on page 74.
6. Use the keypad to type in the speed dial number to be registered with the group dial destination,
and then press the Select key.
Note:
❏ To program a group dial number registered with a group dial destination, press the
Addressbook key, type in the group dial number and then press the Select key.
❏ For details on entering/editing text and the characters that can be entered, refer to "Entering
Text" on page 74.
7. Press the Select key again.
8. Check that ADD is selected, and then press the Select key. Repeat steps 6 through 8 until all desired
destinations are specified.
❏ If no more recipients are to be specified, continue with step 9.
AcuLaser CX16NF Facsimile User's Guide
Registering Recipients 59