Troubleshooting - Epson Aculaser CX16NF User Manual

Error message
NOT REGISTERED
REDIAL ALL FAILED
THE PARTY IS FULL
WRONG PASSWORD
REGISTERED! GROUP DIAL
Cause
No speed dial destination or
group dial destination is
registered.
Otherwise, no destination has
been registered with the
specified speed dial or group dial
number.
All redial attempts failed because
either the recipient's line is busy
or there was no answer.
The maximum number of 236
destinations for the fax data has
been reached.
The password is incorrect.
This error message appears if a
group dial destination was
selected from the favorite list
when specifying a recipient for a
fax being sent using the On hook
key.
AcuLaser CX16NF Facsimile User's Guide
Solution
Directly type in the destination address for the
fax data, or register a speed dial destination or
group dial destination and try specifying the
destination address again.
Check the condition of the recipient's line, and
then try sending the fax again.
Send the fax, and then try scanning again.
Otherwise, delete unnecessary destinations
before adding the desired ones.
Check the password, and then specify the
correct one.
Select a recipient from the favorite list that has
been programmed with a single destination.

Troubleshooting

72