Changing/Deleting Speed Dial Information - Epson AcuLaser CX37DNF User Manual

10. Press the u or d key to select the desired modem speed, and then press the Select key.
The modem speed is specified. Continue with step 11.
Note:
If a transmission error occurs, select 14.4 or 9.6 for the modem speed.
11. Press the Back key.
12. Press the Select key.
The entered information is registered with the speed dial number.
Note:
To return to the Fax mode screen, continue pressing the Back key until the Fax mode screen appears,
or press the Stop/Reset key.

Changing/Deleting Speed Dial Information

The registered speed dial information can be changed.
1. Press the u or d key to select UTILITY, and then press the Select key.
2. Press the u or d key to select DIAL REGISTER, and then press the Select key.
3. Press the u or d key to select SPEED DIAL, and then press the Select key.
The SPEED DIAL screen appears.
4. Use the keypad to type in the speed dial number (1-220) to be edited/deleted, and then press the
Select key.
Note:
For details on entering/editing text and the characters that can be entered, refer to "Entering Text"
on page 78.
5. Press the u or d key to select EDIT or DELETE, and then press the Select key.
❏ If EDIT was selected, the name is displayed. Continue with step 6.
❏ If DELETE was selected, the settings registered with the speed dial number are deleted. This
completes the procedure when it is deleted.
Epson AcuLaser CX37DNF
Registering Recipients
Facsimile User's Guide
63