Adjusting The Scan Density; Specifying A Recipient - Epson Aculaser CX16NF User Manual

❏ FINE/TEXT: Select this setting for documents containing small print.
❏ S-FINE/TEXT: Select this setting for documents containing small print, such as newspapers, and
documents containing detailed illustrations.
❏ STD/PHOTO: Select this setting for photo documents containing regular photos.
❏ FINE/PHOTO: Select this setting for photo documents containing fine images.
❏ S-FINE/PHOTO: Select this setting for photo documents containing finer images.
The resolution returns to the default setting after the document is scanned with a normal
transmission or after transmission after manual transmission. The default setting can be changed.
This is useful for specifying a frequently used resolution setting as the default. For details, refer to the
Printer/Copier/Scanner User's Guide.

Adjusting the Scan Density

1. Press the u or d key to select the current fax image quality, and then press the Select key.
Note:
STD/TEXT, FINE/TEXT, S-FINE/TEXT, STD/PHOTO, FINE/PHOTO or S-FINE/PHOTO may
appear, depending on the setting selected for FAX TX OPERATION function in the UTILITY menu.
2. Press the u or d key to select DENSITY, and then press the Select key.
3. Press the l or r key to select the scan density, and then press the Select key.
The scan density is adjusted.

Specifying a Recipient

The recipients can be specified in any of the following ways.
❏ Direct dialing: Directly type in the fax number.
❏ Using the favorite list: Recall a speed dial destination or group dial destination registered on the
favorite list.
❏ Using the Speed Dial function: Specify a recipient registered with a speed dial.
❏ Using group dial numbers: Recall a registered group dial destination.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 22