Memory Reception; Setting Up The Memory Rx Mode - Epson Aculaser CX16NF User Manual

Note:
To cancel the settings, press the Back key.

Memory Reception

Received faxes can be stored in the memory and printed at a specified time. This is convenient, for
example, when confidential documents are received.
Memory reception can be used with the following settings.
❏ Start/end time settings: Not set
MEMORY RX MODE function is normally set to ON. To print a fax saved in memory, set
MEMORY RX MODE function to OFF.
❏ Start/end time settings: Set
Memory reception mode begins and ends at the specified time.
Example 1: When On Time setting is set to 18:00 and OFF TIME setting is set to 8:00
❏ The machine is in memory reception mode from 18:00 to 8:00 and in normal reception mode,
where faxes are printed after being received, from 8:00 to 18:00.
Example 2: When On Time setting is set to 12:00 and OFF TIME setting is set to 12:00 (the start
time and end time are the same)
❏ MEMORY RX MODE function is normally set to ON; however, faxes saved in memory are
printed at 12:00.

Setting Up the Memory RX Mode

1. Press the u or d key to select UTILITY, and then press the Select key.
Note:
For details on selecting a menu, refer to "General Procedure for Specifying Settings in Utility Menu"
on page 13.
2. Press the u or d key to select FAX RX OPERATION, and then press the Select key.
3. Check that MEMORY RX MODE is selected, and then press the Select key.
4. Using the u or d keys, select ON, and then press the Select key.
AcuLaser CX16NF Facsimile User's Guide
Control Panel and Configuration Menu 14