Table of Contents
Advertisement
Changing Automatic
Redial Settings
Press 7 to select the user-definable switches.
Press 5 to select transmission verification.
Press the # cursor key to turn the option on.
Press
three times to register your selection and return to
SET
the date/time display.
Now every time you send a document, a transmission
verification message prints out automatically from your fax
machine if the document successfully reaches its destination.
If you use automatic sending and
busy, the fax machine enters the automatic redial mode.
This feature leaves you free to continue with other work
without neglecting to send out that important document.
The factory setting for Automatic Redial causes the
PriorityFax to redial
minutes until it reaches the other fax machine or until it
redials six times. If you want to change
or the number of minutes between tries, follow these steps:
Make sure no document is in the machine.
Press
You see the function display.
FUNCTION.
Using the PriorityFax Advanced Features
fax number you dial is
the
number you tried every five
the
the
number of tries
4-11
Advertisement
Table of Contents
