Table of Contents
Advertisement
4.2 INSTRUCTIONS FOR THE DISASSEMBLY/ASSEMBLY OF THE CLUTCH
ATTENTION:
the following operations can be performed by a skilled mechanic, under the
condition to have available the dedicated tools shown on the text; otherwise it is
necessary to apply to an Authorized Service Center.
Refer to the following drawing during the operations.
1 Drum nut
2 External washer
3 Roller cage
4 Sprocket
Clutch disassembly
1. Remove the clutch cover (3 screws M6).
2. Remove the spark plug and replace with special tool
to prevent crankshaft from turning.
3. Remove nut (1 screw M10x1).
4. Remove the external washer, the drum complete
with roller cage, the internal washer.
5. Remove the special tool from the head and using the
clutch wrench, remove the 20x1 nut and the starter
ring.
ATTENTION: turn clockwise as the nut has the
left thread.
6. Apply the clutch puller on clutch and remove the
clutch, with starter ring.
7. Remove the starter ring (3 screws M6)
5 Screw
6 Clutch drum
7 Internal washer
8 Locking nut
OPERATIONS
9 Clutch body
10 Starter ring
11 Screw
Allen Wrench 5mm – T type
Piston fitting: P.N. 10271
12 point wrench 17 mm
Clutch wrench: P.N. S884
30 mm socket
Clutch puller :P.N. 10272-C
12 point wrench 19mm.
12 point wrench 10 mm
38
TOOLS
MAN-051 ING
Hide quick links:
Advertisement
Table of Contents
