Table of Contents
Advertisement
F4 VERSION (FLOAT CHAMBER CARB)
2.5.3 INSTALLATION OF THE FUEL PUMP (IF
NOT ALREADY ASSEMBLED IN ORIGIN)
INSTALL THE VIBRATION DAMPENERS ON
THE GEAR BOX COVER I (SEE FIG. 6).
PLACE THE FUEL PUMP WITH THE OUTLET
FITTING TOWARDS THE UPPER SIDE AND
TORQUE THE SELF-LOCKING NUTS M6.
TORQUE AT 6 ÷ 10 Nm (50 ÷ 90 in-lb) (SEE
FIG.7)
10mm PIPE WRENCH
2.5.4 INSTALLATION OF THE CARBURETTOR
REMOVE THE PLASTIC PLUG FROM THE
INLET MANIFOLD AND INSTALL THE CARB.
THEN TIGHTEN THE STEEL CLAMP (SEE FIG.
8).
CONNECT BY MEANS OF A TUBE (FUEL PIPE
TYPE) THE PRESSURE INTAKE FITTING ON
THE CRANKCASE AND THE PUMP PRESSURE
INTAKE.
BY MEANS OF ANOTHER TUBE CONNECT
THE FUEL PUMP OUTLET TO THE CARB.
MANIFOLD. (SEE FIG.9).
Fig.6
PRESS
IN
Fig.7
Fig.8
Fig.9
12
OUT
MAN-051 ING
Hide quick links:
Advertisement
Table of Contents
