IAME REEDSTER 125cc Assembly Instructions & User Manual page 20

2.9.8 CONNECT THE H.T COIL CABLE TO THE
HARNESS TERMINAL (SEE FIG.27).
ATTENTION:
FASTEN THE H.T. COIL CABLE WITH A
PLASTIC CLAMP TO AVOID THAT EVENTUAL
VIBRATIONS MIGHT DISCONNECT
TERMINALS (SEE FIG.28).
2.9.9 CUT THE DUAL-LOCK FIXING STRAP
AND ATTACH IT TO THE REAR OF THE
ELECTRONIC BOX, THE STARTER FUSE AND
THE RELAY (SEE FIG.29).
NOTE:
THE COLOUR OF THE ELECTRONIC BOX
CHANGES ACCORDING TO THE ENGINE
VERSION AND TO THE
SETTING:
- YELLOW = F4 vers. (14000 RPM max.)
- BLUE = F3 vers. (14000 RPM max.)
- GREEN = F2 vers. (15000 RPM max.)
- RED = F1 vers. (16000 RPM max.)
2.9.10 CONNECT THE ELECTRONIC BOX TO
THE 20 POLE CONNECTOR ON THE HARNESS
(SEE FIG.30).
ATTENTON:
MAKE SURE THAT THE FIXING TONGUES
ARE PROPERLY INSERTED TO GUARANTEE
THE BEST POSSIBLE CONNECTION OF THE
TERMINALS.
THE
Fig.27
Fig.28
ELECTRONIC BOX.
REV. LIMITER
Fig.29
Fig.30
18
RELAY
MAN-051 ING