Preparation And Installation Of The Motor-Mount - IAME REEDSTER 125cc Assembly Instructions & User Manual

INITIAL PREPARATION OF THE
2.3
ENGINE
2.3.1 ON THE EXHAUST POWER VALVE
THERE IS A WARNING TAG TO REMIND THE
USER THAT THE GEAR BOX MUST BE FILLED
WITH OIL BEFORE STARTING THE ENGINE
(SEE FIG.1).
NOTE:
THE ENGINE IS
EXHAUST FITTING AND SPACER ALREADY
PRE-INSTALLED.
2.3.2
WHEN THE SHIPMENT IS MADE, THE
ENGINE INNER PARTS ARE PROTECTED BY
PLASTIC PLUGS WHICH MUST BE REMOVED
BEFORE INSTALLING THE ENGINE (SEE
FIG.2).
- SPARK PLUG HOLE PLUG
- WATER FITTING PLUGS
- EXHAUST FITTING PLUG
- CARBURETTOR FITTING PLUG
2.4
2.4.1 DRILL 4 HOLES (8.25÷8.5mm DIAM.) IN THE ENGINE MOUNT.
NOTE: PREFERABLY USE A FLAT MOTOR MOUNT.
MOTOR MOUNT HORIZONTAL VIEW
SUPPLIED WITH THE

PREPARATION AND INSTALLATION OF THE MOTOR-MOUNT

NOTE: ALL DIMENSIONS ARE IN MILLIMETERS
Fig.1
Fig.2
10 MAN-051 ING