Base Station Settings - Topcom BUTLER OUTDOOR 2010 TWIN User Manual

Base station settings

6.5 Deleting one entry or all entries
1. Press .
16
2. Use the alphanumeric keypad to enter the initial letters of the
4
name and/or use
3. Press when the number appears in the display.
17
4 15
4. Press or repeatedly, select 'DELETE' or
'DELETE ALL'.
5. Press to confirm.
17
6. Press to confirm again or the escape key ESC
17
to cancel.
7 Base station settings
7.1 Changing the PIN code (system PIN code)
Some functions are only available if you know the PIN code for the
base station.
The PIN code comprises 4 digits and the default code is '0000'.
Proceed as follows to change the preset PIN code or to enter a
new PIN code.
1. Press .
17
4 15
2. Press or repeatedly, select 'BS SETTINGS'.
3. Press to confirm.
17
4 15
• Press or repeatedly, select 'PIN CODE'.
4. Press and enter the old PIN code.
17
5. Press . If an incorrect PIN code is entered,
17
'WRONG PIN!' appears in the display. If you have entered the
correct PIN code, you are prompted to enter a new PIN code.
Enter the new system PIN and press
22
15
or to scroll to the desired entry.
.
17
7.2 Easy conference mode
When this function is enabled you can easily set up a conference
between 2 handsets and the external line. When one handset is in
communication with the external line, the second handset only has
to go off-hook to be in conference (communication with the 1st
handset and external line). To turn this function on or off:
1. Press
17
4
2. Press or
3. Press
17
3
4. Press 4 or
5. Press
17
6. Select 'ON' or 'OFF' and press
When this function is turned off you can still set up a
conference call as described in "9.3.5 Conference calls
(two internal handsets and an external caller)"
7.3 Reset
All personal settings, call log and redial list entries will be deleted.
And all handsets and base settings will return to factory default
settings.
Phonebook list will not be deleted after reset.
1. Press
17
4
2. Press or
3. Press
17
4
4. Press or
5. Press
17
Press again to confirm.
17
The phone will return to set up mode (see "4.1 Powering up (Set
up mode)").
Butler Outdoor 2010 - Twin - Triple
.
15
repeatedly, select 'BS SETTINGS'.
to confirm.
15 repeatedly, select 'CONFERENCE'
to confirm.
to confirm.
17
.
15
repeatedly, select 'BS SETTINGS'.
to confirm.
15
repeatedly, select 'RESET'
to confirm.