Topcom BUTLER OUTDOOR 2010 TWIN User Manual page 25

Butler Outdoor 2010 - Twin - Triple
9.3.2 Answering an internal call
• 'CALLING FROM HANDSET X' appears in the display.
1. Press 14 to answer the internal call.
OR
1. Lift the handset off its base station (if auto talk is selected, see
section "4.24 Auto talk").
• The handset number of the calling handset appear in the
display during the call.
2. Press to hang up at the end of your call.
6
9.3.3 Answering an external call during an internal call
If you receive an external call during an internal call, you will hear
the call waiting tone (double beep) in both handsets involved in the
internal call.
1. Press 6 .
• The internal call is ended.
2. Press .
14
• You have now answered the external call.
9.3.4 Forwarding a call to another handset
• You have an external caller on the line.
1. Press INT .
12
4 15
2. Press or repeatedly and select the handset you
want to call.
• Select 'ALL HANDSETS' to call all handsets.
• Press 17 to call the selected handset(s). If the called
handset answers and you can conduct an internal call.
3. Press 6 to connect the external caller to the called
handset.
OR
• The internal called party does not answer.
4. Press INT' again to talk to the external caller again.
12
Additional handsets and base stations
9.3.5 Conference calls (two internal handsets and an
external caller)
You can conduct a phone call with an internal and an external party
at the same time.
1. Press INT .
12
4 15
2. Press or repeatedly and select the handset you
want to call.
• Select 'ALL HANDSETS' to call all handsets.
3. Press to call the selected handset(s). If the called
17
handset answers and you can conduct an internal call.
4. Press and hold the INT key until you see 'CONFERENCE' on
the screen
• You are now connected to an external and an internal party
and can talk to both of them at the same time (conference
call).
If you have turned on the Conference function (see "7.2
Easy conference mode") you can also make a
conference call by just going off-hook on the second
handset when 1st handset is in communication with the
external line.
9.4 Voicemail display
This display only works if you have enabled the voicemail or
telephone message service and your line provider transmits this
information along with the caller ID!
When you receive a new message in your voicemail box, the
symbol appears in the display. The
you have listened to your message.
To listen your messages you have to dial a certain number, this
number can be programmed under key '1' (see "4.26 Voicemail
dial key number").
symbol disappears when
25