Line Settings - Topcom BUTLER OUTDOOR 2010 TWIN User Manual

Butler Outdoor 2010 - Twin - Triple
8

Line settings

8.1 Set country
There are various country depending settings and by setting the
country these parameters are set correspondingly. Each
parameter can be set separately also. Some settings like dial
mode cannot be set if there are no different options in the set
country.
To set the country version:
1. Press .
17
4 15
2. Press or repeatedly, select 'LINE SETTINGS'.
3. Press to confirm.
17
4. Press 4 or 15 repeatedly, select 'COUNTRY'
5. Press 17 to confirm.
4 15
6. Press or repeatedly to select the country and
press to confirm.
17
7. Press again to confirm.
17
8.2 The flash key (R)
You can use the flash key R
on your external calls, such as "call waiting" (providing your
telephone line provider offers this feature). The flash key is also
used for internal recall or for connecting a call when operating the
telephone on a PABX. The flash key R
interruption in the line. You can set this interruption time to short,
medium or long.
1. Press .
17
4 15
2. Press or repeatedly, select 'LINE SETTINGS'.
3. Press to confirm.
17
4 15
4. Press or repeatedly, select 'RECALL TIME'.
5. Press to confirm.
17
14 to use or activate certain services
14 causes a brief
4 15
6. Press or repeatedly to select 'SHORT',
'MEDIUM' or 'LONG' and press
8.3 First ring
When you receive a new voice mail waiting indication (VMWI) (see
"9.4 Voicemail display") you may hear a short ring. If you want to
avoid this you can change the first ring setting to off.
1. Press .
17
4 15
2. Press or repeatedly, select 'LINE SETTINGS'.
3. Press to confirm.
17
4 15
4. Press or repeatedly, select 'FIRST RING'
5. Press to confirm.
17
6. Select 'ON' or 'OFF' and press
8.4 Setting the dialling mode
There are two different dialling modes that can be used when
making calls:
• DTMF = dual tone multiple frequency, or tone dialling (today's
modern dialling mode)
• Pulse dialling (in older devices)
Modern devices are equipped with both functions which can be
changed depending on the application. DTMF is required for
programming or control functions, for example, if the device is
operated on a PBX. If pulse dialling is used, malfunctions can
occur on PBXs during normal operation because the system
interprets the pulse dialling signals incorrectly.
This menu is only available in some countries, depending
on which country you have set (see "8.1 Set country").
Changing the dialling mode:
1. Press .
17
Line settings
to confirm.
17
to confirm.
17
23