Base Settings; First Ring Tone; Setting The Dialling Mode - Topcom Butler E700 User Manual

Base settings

To access your voice mail :
1 Press and hold the '1'key in standby.
6.13 Paging
You can locate a missing handset by pressing the page key
registered to the base will produce the paging tone and "PAGING" is displayed. You can stop the
paging by pressing any key on the handset or by pressing the page-key
7 Base settings
7.1 Set the flash time
Press the flash key R (key 14 - picture 1D Handset) to use certain services on your external line such
as "call waiting" (if your phone company offers this feature); or to transfer calls if you use a
telephone exchange (PABX). The flash key R is a brief interruption of the line. You can set the flash
time to 100ms, 300ms or 600ms ("SHORT"," MEDIUM" and "LONG"):
1 Enter the menu by pressing the left menu key.
2 Select "ADVANCED SET" and confirm.
3 Select "RECALL TIME" and confirm.
4 Select "SHORT", "MEDIUM" or "LONG" and confirm.
7.2 Setting the system PIN code
Certain functions are only available to users who know the PIN code.
By default the PIN code is 0000. To change the PIN code:
1 Enter the menu by pressing the left menu key.
2 Select "ADVANCED SET" and confirm.
3 Select "CHANGE PIN" and confirm.
4 Enter the current PIN code and confirm.
5 Enter the new PIN code and confirm.
7.3

First ring tone

You can turn of the first ring tone as followed:
1 Enter the menu by pressing the left menu key.
2 Select "ADVANCED SET" and confirm.
3 Select "FIRST RING" and confirm.
4 Select "ON" or "OFF" and confirm.
7.4

Setting the dialling mode

There are two different dialling modes that can be used when making calls:
• DTMF = dual tone multiple frequency, or tone dialling (today's modern dialling mode)
• Pulse dialling (in older devices)
Modern devices are equipped with both functions which can be changed depending on the
application. DTMF is required for programming or control functions, for example, if the device is
operated on a PBX. If pulse dialling is used, malfunctions can occur on PBXs during normal
operation because the system interprets the pulse dialling signals incorrectly.
1 Enter the menu by pressing the left menu key.
14
on the base station. All the handsets
again on the base.