How To Install The Base Station (See Right Flap) - Topcom Webt@lker 6000 Installation Manual

How to install the base station
Please refer to the right flap of this Installation Guide for
illustrations for the installation of the base station.
a) Connect
Network) port on your broadband connection (modem,
router, hub, switch etc.) using the provided Ethernet cable.
b) Connect the power adapter to an active power outlet and
connect
(12 V, 300 mA, 3.6 VA).
c) Connect
(if available), using the provided telephone cable and
optional plug.
The light indicator on the front has two functions:
• Always on confirms that the Ethernet cable is connected.
• Blinking indicates that the Ethernet cable is not connected.
on the base station to a LAN (Local Area
on the base station to the power adapter
on the base station to a telephone socket
H O W T O I N S TA L L T H E B A S E S TAT I O N
13