Placing A Three-Way Conference Call - Cisco SPA50X User Manual

Using Basic Call Management Functions

Placing a Three-Way Conference Call

STEP 3
STEP 1
STEP 2
STEP 3
Placing a Three-Way Conference Call
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
Press dial. The call is picked up on your phone.
To view a list of parked calls (and unpark from the list):
Press the Setup button.
Select Call Park Status.
Choose the parked call you want to retrieve and press unpark.
You can start conference calls by:
• calling both numbers and pressing the conf softkey.
• conferencing an active and held call using the confLX softkey (except on the
Cisco SPA501G).
Three-way Conference Calling (except the Cisco SPA501G)
To initiate a conference call:
Press the conf softkey during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
Dial the second telephone number.
Press the conf softkey again. All three parties are connected in the conference
call. When you hang up, the other two parties are disconnected.
Three-way Conference Calling by using a Cisco SPA501G
To initiate a conference call:
Press the Conference button during an active call. The first call is placed on hold, a
second line is opened, and you hear a dial tone.
Dial the second person's telephone number.
3
42