Settings; Application; Automatic Start; Call Reverse - Aastra AMC 3.0 User Manual

11 Settings

There are a couple of mandatory settings that have to be configured to be able to use
all of your AMC's features. All settings, mandatory and optional, are explained in this
chapter.
Configuration Loss with Firmware Updates
With a firmware update, the AMC application will not be deleted. However,
the configuration of your AMC will be lost and must be reloaded. To download
the configuration data manually, open the Settings section of your AMC, and
re-enter the Registrar, Username and Password settings.
If the Hide settings checkbox has been set by the Admin in the AMC Portal,
some of them might not be visible to the user.
Never change preconfigured Settings!
Every number has to be configured on the AMCC, and will hence in most
cases be preconfigured on the AMC. If one of them does not work properly,
ask your administrator to check if the according feature has been activated for
your User Account on the AMCC. If your AMC has been preconfigured, simply
skip the Configuration chapter. However, you may want to consult it, to fully
understand how your AMC works. The AMC downloads the configuration
from the Aastra portal.

11.1 Application

The following settings can be found in the general settings of the AMC.

11.1.1 Automatic Start

If Automatic Start is enabled, the AMC will be started automatically whenever the phone
is switched on.

11.1.2 Call Reverse

If this option is enabled inbound calls will be rejected and an automatic call back to
the party in concern is initiated. Refer to
option Maintain 3G Connection is automatically enabled if Call Reverse is enabled.
amc-3.0_symbian_ug_en_2012-09
11 Settings
11.4.8 for a description of Call Reverse. The
35