Registration Status - Aastra AMC 3.0 User Manual

7.1.2 Registration Status

This registration icon indicates that there is a VoIP-capable data connection.
This data connection may be Wi-Fi or Packet Data(refer to
tion about Packet Data settings).
This icon indicates that a system registration is in progress.
The red icon appears if the system registration has failed. This may be caused
by faulty user credentials. Please contact support if this problem persists.
You will see this icon if there is currently no data connection available, and
therefore no system registration possible. Whenever a configured Access
Point becomes available, the AMC can re-registers itself in the system if it
is configured to do so. Please note that system registration (data access) is
needed for fast mode call setup method.
Registrations in Data Networks other than Wi-Fi
Please note that certain settings have to be enabled for the AMC to register
over Packet Data (refer to 11.2.2).
Even if these settings are set to allow Packet Data, in order to save battery
a connection/system registration will only be held as long as there is user
interaction. The connection will be terminated (and along with this the AMC
will de-register itself) when there is no interaction. If this happens, there will
be no re-connection and re-registration until there is user interaction (Corpo-
rate Phonebook search etc.) that requires a re-connection, or if there is an
incoming call.
Refer to: Auto Login described in
calls; Maintain 3G Connection described in
networks.
Static Roaming
When the AMC is turned off, calls will only be routed to the GSM Number of a user
if Static Roaming is activated for this user. If Static Roaming is deactivated on the
AMCC, the AMC will not be available in cellular-only networks.
amc-3.0_symbian_ug_en_2012-09
7 General Operation of the AMC
11.2.1
11.2.2
for interactions other than inbound
11.1.16 for VoIP calls over 3G
for informa-
18