Managing Access Points - Aastra AMC 3.0 User Manual

7.2 Managing Access Points

Hidden Access Points
If you manually configure a hidden access point (AP), you have to use the
option Blacklist whenever it is out of reach. Since its hidden the AMC can't
check its availability and due to Symbian restrictions will always be marked
as "available" if you don't Blacklist it manually!
Note: On the Symbian S60 3
of your present mobile subscription provider defined. Delete all non-relevant entries,
like old APs if you have changed your provider. It is also important to have the AP to
be used (like "T-Mobile Internet" in the second screenshot above) as first "SIG" entry.
It is this AP that should have the AP name defined, like "online.telia.se". Normally this
setting is auto-configured by the provider.
Note: Whenever you restart the AMC your AP list will be synchronized automatically!
amc-3.0_symbian_ug_en_2012-09
7 General Operation of the AMC
Move the cursor to the access point status line
and click the main button of your smartphone. The
second screenshot to the left shows an example
AP Settings screen.
differentiates between VOIP, for voice quality, and
SIG, for signal-only, access points. You can set this
differentiation in the Options screen according to
your experience.
With the Options menu in this screen you can Move
Down and Disconnect access points according to
your preference. APs which are on top of the list
will be preferred. Blacklist gives you the possibility
to deny usage of an access point(this is of interest
if Auto Login, refer to
access point is of too poor quality).It also gives
you the opportunity to Synchronize your AP List
in the AMC with the access points configured
in the native application of your phone, and to
classify your access points as Signal Only (SIG) or
VOIP. If you want to have SIP signaling over Wi-Fi
but call-setup signaling and media over the cellular
network, you need to select the Single Mode setting!
rd th
and 5 Edition OS it is important to have only the APs
As you can see, the AMC
11.2.1 is enabled or if an
20