Codec, Jitter Buffer Size And Transport - Aastra AMC 3.0 User Manual

11 Settings
11.3.5 Default IM Host
If you would like to use the IM and Presence service of the AMC, the host URI of the
desired Default IM Host in your network has to be entered here. Contact your adminis-
trator for further information. As soon as the Default IM Host has been set correctly the
presence status line becomes available in the Home screen. Normally this will be your
corporate domain.

11.3.6 Codec, Jitter Buffer Size and Transport

These settings should not be altered. The factory default values of the AMC are nor-
mally apt to a variety of network configurations. There should hence be no need for
modification.
Note: Transport Protocol should be TCP only! The reasons are system performance
and battery time.
44
amc-3.0_symbian_ug_en_2012-09