User Settings; Options Menu; Connect And Disconnect; Auto Handover - Aastra AMC 3 User Manual

Blackberry

Hide thumbs Also See for AMC 3:

Table of Contents

11 User Settings

There are a couple of mandatory settings that have to be conﬁgured to be able to use

all of your AMC's features. All settings, mandatory and optional, are explained in this

chapter.

Conﬁguration Loss with Firmware Updates

With a ﬁrmware update, the AMC application will not be deleted. However,

the conﬁguration of your AMC will be lost and must be reloaded. To download

the conﬁguration data manually, open the Settings section of your AMC, and

re-enter the Registrar, Username and Password settings.

If the Hide settings checkbox has been set by the Admin in the AMC Portal,

some of them might not be visible to the user.

Never change preconﬁgured Settings!

Every number has to be conﬁgured on the AMCC, and will hence in most

cases be preconﬁgured on the AMC. If one of them does not work properly,

ask your administrator to check if the according feature has been activated for

your User Account on the AMCC. If your AMC has been preconﬁgured, simply

skip the Conﬁguration chapter. However, you may want to consult it, to fully

understand how your AMC works. The AMC downloads the conﬁguration

from the Aastra portal.

The following settings are available in the Options menu of your AMC.

Continue or cancel your current system registration with this option. For an explanation

of the registration icons refer to 7.4.

Disable or enable automatic handovers from Wi-Fi to cellular networks and vice versa.

If this is enabled, a handover from Wi-Fi will be performed automatically if the Wi-Fi

signal strength decreases too much to maintain a reliable VoIP connection. A handover

amc-3_blackberry_ug_en_2012-12

11 User Settings

Table of Contents