Server Commands - Genicom Intelliprint cL160 User Manual

GENICOM Intelliprint cL160 User Guide

Server Commands

Server Commands
Apr 02
Frequently-used Server Commands
Command Option(s)
DEFINE SERVER BOOTP {EN|DIS}
DEFINE SERVER DHCP {EN|DIS}
DEFINE SERVER GATEWAY ipaddress
DEFINE SERVER BOTH
INCOMING option
LAT
NONE
TELNET
PASSWORD
NOPASSWORD
DEFINE SERVER IPADDRESS ipaddress
DEFINE SERVER LOADHOST ipaddress
DEFINE SERVER LOGIN PASSWORD
DEFINE SERVER NAME "newname"
DEFINE SERVER NETWARE LOADHOST server
DEFINE SERVER PRIVILEGED PASSWORD
DEFINE SERVER RARP {EN|DIS}
Genicom
Description
Enables or disables querying for a BOOTP
host at system boot time.
Enables or disables querying for a DHCP
host at system boot time.
Specifies the host to be used as a TCP/IP
gateway to forward packets between
networks. Enter an IP address.
Enables incoming LAT and Telnet
connections.
Enables only incoming LAT connections.
Disables incoming connections.
Enables only incoming Telnet connections.
Causes the server to prompt for a password
for all incoming connections.
Allows connections to be established
without prompting for a password.
Sets the Server's network IP address.
Specifies the TCP/IP host from which the
Server requests its run-time code.
Sets a new password that will be required
before incoming logins are accepted. You
will be prompted for the new password (up
to 6 alphanumeric characters,
case-insensitive).
Specifies a new name for the Server.
Names are restricted in length; generally a
name of 11 or fewer characters is
permissible.
Specifies the NetWare host from which the
Server requests its run-time code. Enter a
file server name of up to 11 characters.
Sets a new password that will be required
for privileged user status. You will be
prompted for the new password (up to 6
alphanumeric characters, case-insensitive).
Enables or disables querying for a RARP
host at system boot time.
Publication No. GEG-99141
D-3