I Dtmf Transmission; I Channel Lock Function - Icom IC-400PRO Instruction Manual

I DTMF
transmission
Up to 8 DTMF (Dual Tone Multiple Frequency) code channels
are available for storage of often used DTMF codes of up to
24 digits and the automatic DTMF transmission function is
available without using the optional HM-100TN
.
PHONE
DTMF signaling can be used for remote control via phone
patch system, etc.
[DTMF Autodial] must be assigned to the desired pro-
grammable key using the optional CS-400PRO
.
SOFTWARE
To transmit a DTMF code:
q Push [DTMF Autodial]—a DTMF code channel appears.
DTMF code channel appears.
w Push [
]/[ ] to select the desired DTMF channel.
e Push [DTMF Autodial] to transmit the DTMF code the
selected DTMF channel.
If the transceiver has a [Re-dial] key, the last transmitted
DTMF code is sent immediately when pushing the key.
I Channel lock
KEY ASSIGNMENT
This function electronically locks [
Start/Stop)/(ID-MR Select), [MR-CH 1] to [MR-CH 4] and
[Hook Scan] keys (if assigned) to prevent accidental chan-
- nel change.
DTMF MICRO
➥ Push [Ch Lock] for 1 sec. to turn the channel lock func-
CLONING
OTHER FUNCTIONS
function
[Ch Lock] must be assigned to the desired programmable
key using the optional CS-400PRO
tion ON and OFF.
Push [Ch Lock]
for 1 sec.
7
KEY ASSIGNMENT
], [ ], [SCN] (Scan
.
CLONING SOFTWARE
7
24