I Rx Frequency Setting - Icom IC-400PRO Instruction Manual

7
OTHER FUNCTIONS

I RX frequency setting

The receive frequency in the private bank channels can be
re-programmed within 450 to 500 MHz frequency range
depending on the setting.
q Push [
]/[
w While in Function mode, push [ O ] (Bank/Func) for 1 sec.
to enter Set mode.
• Push [ O ] (Bank/Func) for 1 sec. to enter the transceiver into
Function mode.
• The bank and channel can be selected after entering Set mode.
Bank*
The keys under these indicators can be activated.
25
(for private banks only)
] to select the desired channel.
Push [ O ] for 1 sec.
Channel*
*The bank and channel number
are continuously displayed af-
ter entering set mode.
e Push [MONI] for 1 sec. to enter the individual setting.
r Push [MONI] several times until the RX frequency appears.
Push [MONI]
t Push [DUP] to enter the RX frequency setting mode.
Push [DUP]
y Push [DUP] to select the desired digit to be edited.
Push [DUP]
u Push [ ]/[
] to set the desired number.
Push [ ] or [ ]
[
RX frequency appears
The first digit starts blinking.