Icom IC-400PRO Instruction Manual page 3

DO NOT
push the PTT when not actually desiring to trans-
mit.
DO NOT
use or place the transceiver in areas with tem-
peratures below –10°C or above +60°C, or in areas subject to
direct sunlight, such as the dashboard.
AVOID
operating the transceiver without running the vehi-
cle's engine. When the transceiver's power is ON and your
vehicle's engine is OFF, the vehicle's battery will soon
become exhausted.
AVOID
placing the transceiver in excessively dusty envi-
ronments.
AVOID
placing the transceiver against walls. This will
obstruct heat dissipation.
AVOID
setting the transceiver in a place without adequate
ventilation. Heat dissipation may be affected, and the trans-
ceiver may be damaged.
AVOID
the use of chemical agents such as benzine or
alcohol when cleaning, as they damage the transceiver sur-
faces.
USE
the specified microphone only (supplied or optional).
Other microphones have different pin assignments and may
damage the transceiver.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
This device complies with Standard
Australia Specification No. AS/NZS4365-
1996 and AS4295-1995.
ii