Icom IC-400PRO Instruction Manual page 15

D Setting scan resume condition
q Push [ O ] (Bank/Func) for 1 sec. to enter Function mode.
w Push [ O ] (Bank/Func) for 1 sec. again to enter Set mode.
Push [ O ] for 1 sec.
Bank* Channel*
The keys under these indicators can be activated.
e Push [SCN] for 1 sec. to enter the common setting for the
transceiver.
r Push [SCN] several times until "SST" appears.
Push [SCN]
*The bank and channel number
are continuously displayed af-
ter entering set mode.
SST appears
t Push [
]/[ ] to select the desired scan resume condi-
tion.
- "T-5" : Scan pauses for 5 sec. then resumes.
- "T-10" : Scan pauses for 10 sec. then resumes.
- "T-15" : Scan pauses for 15 sec. then resumes.
- "P-5" : Scan pauses until the signal disappears, then resumes
5 sec. after the signal disappears.
T-5 setting
T-15 setting
y Push [SCN] for 1 sec., then push [ O ] for 1 sec. to return to
Normal mode.
SCAN OPERATION
[
T-10 setting
P-5 setting
4
4
10