Icom IC-400PRO Instruction Manual page 36

7
OTHER FUNCTIONS
• STN code (Station to be called)
➥ Select the station code channel with [
➥ Set the desired station code following the steps as below.
q While the station code is displayed, push [DUP] to
enter the station code edit mode.
w Push [DUP] to select the desired digit to be edited.
• Editable digit blinks
e Push [ ]/[
• Select "❋" when group code is set.
r Push [DUP] to set the code and the editable digit
move to right automatically.
t Repeat step e and r to input all allowed digits.
y Push [DUP] to set the station code.
The station code 11111
The code channel name is displayed.
(if programmed)
31
]/[
] to set the desired code.
Push
[DUP]
• ID code (Self ID number)
➥ Select the ID code channel with [
] key.
➥ Set the desired ID code in the same way as the station
code setting.
The ID code 12345
The code channel name is displayed.
(if programmed)
]/[ ] key.
Push
[DUP]