Ftp Example: Add A Ftp Filter Rule To Block Ftp Delete Command; Figure 9.18 Network Diagram For Ftp Filter Example - Blocking Ftp Delete Command; Figure 9.19. Ftp Filter Example - Configuring Ftp Filter Rule - Asus RX3041H User Manual

High-speed router

Table of Contents

RX3041H User's Manual

9.8.1.2.1 FTP Example: Add a FTP Filter Rule to Block FTP DELETE Command

Figure 9.18 Network Diagram for FTP Filter Example – Blocking FTP Delete Command

1. Open the Application Filer configuration page by clicking the Firewall

Policy List

2. Select FTP from the Filter Type drop-down list.

3. Select "Add New Filter" from the Filter Rule drop-down list.

4. Enter a name for this rule – in this example, FTPRule1.

5. Change the port number if necessary. However, it is recommended

that you keep the "Default" setting.

Filter Rule drop-

down list

Figure 9.19. FTP Filter Example – Configuring FTP Filter Rule

6. Choose to enable to disable the logging option. The default setting is to keep the logging for this

rule disabled.

7. Click on the first FTP commands field, a Firewall Configuration Assistant page is displayed.

10.64.2.0

Outside FW

ISR

Inside FW

Private Network 192.168.1.0/24

Application Filter menu.

Chapter 9. Configuring Firewall/NAT Settings

FTP Server

10.64.2.254

Filter Type drop-down list

Table of Contents