RX3041H User's Manual
9.8.2.5
IP Pool Example
1. Open the IP Pool configuration page to create two IP groups – see Figure 9.28.
Figure 9.28. IP Pool Example – Add Two IP Pools – MISgroup1 and MISgroup2
2. Associate an IP pool to firewall ACL rules – inbound, outbound or group ACL by selecting "IP
Pool" from the Source IP Type drop-down list and then choose an IP pool from the IP pool drop-
down list. In this example, IP pool is used to associate to source IP; however, it can be used to
associate to destination IP as well. As shown in Figure 9.29, MISgroup1 is not allow to play
networked game, Quake-II at all times.
192.168.1.10
192.168.1.11 192.168.1.12
MISgroup1
Figure 9.27. Network Diagram for IP Pool Configuration
Chapter 9. Configuring Firewall/NAT Settings
Internet
Outside FW
ISR
Inside FW
MISgroup2
77