Table of Contents
Advertisement
Chapter 3. Quick Start Guide
here is to quickly get the router up and running, instructions are concise. You may refer to corresponding
chapters for more details.
3.3.1
Buttons Used in Setup Wizard
The RX3041H provides a preinstalled software program called Configuration Manager that enables you to
configure the RX3041H via your Web browser. The settings that you are most likely to need to change before
using the device are grouped onto sequence of configuration pages guided by Setup Wizard. The following
table shows the buttons that you'll encounter in Setup Wizard.
Button
3.3.2
Setting Up the RX3041H
Follow these instructions to setup the RX3041H:
1. Before accessing the Configuration Manager in the RX3041H, make sure that the HTTP proxy
setting is disabled in your browser. In IE, click "Tools"
"Connections" tab
2. On any PC connected to one of the four LAN ports on the RX3041H, open your Web browser,
and type the following URL in the address/location box, and press <Enter>:
This is the predefined IP address for the LAN port on the RX3041H.
A login screen displays, as shown in Figure 3.2.
If you have problem connecting to the RX3041H, you may want to check if your PC is configured to
accept IP address assignment from the RX3041H. Another method is to set the IP address of your PC
to any IP address in the 192.168.1.0 network, such as 192.168.1.2.
3. Enter your user name and password, and then click
Manager. The first time you log into this program, use these defaults:
Default User Name:
14
Click this button to save the information and proceed to the next
configuration page.
Click this button to go back to the previous configuration page.
"LAN settings..." and then uncheck "Use proxy server for your LAN ..."
http://192.168.1.1
Figure 3.2. Login Screen
admin
Function
"Internet Options..."
to enter the Configuration
RX3041H User's Manual
Advertisement
Table of Contents
