Step 4. Turn On The Rx3041H, The Adsl Or Cable Modem And Power Up Your Computers; Figure 3.1. Overview Of Hardware Connections; Table 3.1. Led Indicators - Asus RX3041H User Manual

Chapter 3. Quick Start Guide
3.1.4 Step 4 – Power up devices.
Turn on the RX3041H, the ADSL or cable modem and power up your computers.
Press the Power switch on the rear panel of the RX3041H to the ON position. Turn on your ADSL or cable
modem. Turn on and boot up your computer(s) and any LAN devices such as hubs or switches.
You should verify that the LEDs are illuminated as indicated in Table 3.1. If the LEDs illuminate as expected,
the RX3041H is working properly.
This LED:
POWER
LAN1 –
LAN4
WAN
10

Figure 3.1. Overview of Hardware Connections

Table 3.1. LED Indicators

...should be:
Solid green to indicate that the device is turned on. If this light
is not on, check if the AC adapter is attached to the RX3041H
and if it is plugged into a power source.
Solid green to indicate that the device can communicate with
your LAN or flashing when the device is sending or receiving
data to/from your LAN computer.
Solid green to indicate that the device has successfully
established a connection with your ISP or flashing when the
device is sending or receiving data to/from the Internet.
RX3041H User's Manual