RX3041H User's Manual
9.7.2.2
Add a Service
To add a service, follow the instructions below:
1. Open the Service List configuration page by clicking the Firewall
Advanced
Service.
2. Select "Add New" from the service drop-down list.
3. Enter a desired name, preferably a meaningful name that signifies the
nature of the service, in the "Service Name" field. Note that only
alphanumeric characters are allowed in a name.
4. Make changes to any or all of the following fields: public port and protocol. Please see Table 9.4
for explanation of these fields.
5. Click on the
the service list table at the bottom half of the Service configuration page.
9.7.2.3
Modify a Service
To modify a service, follow the instructions below:
1. Open the Service List configuration page by clicking the Firewall
2. Select the service from the service drop-down list or click on the
modified in the service list table.
3. Make desired changes to any or all of the following fields: service name, public port and protocol.
Please see Table 9.4 for explanation of these fields.
Service drop-down list
Figure 9.14. Service List Configuration
button to create the new service. The new service will then be displayed in
Edit icon
Figure 9.15. Service List
Chapter 9. Configuring Firewall/NAT Settings
Advanced
Service.
icon of the service to be
65