Table of Contents
Advertisement
Chapter 9. Configuring Firewall/NAT Settings
To configure DoS settings, follow the instructions below:
1. Open the DoS configuration page by clicking on the Firewall
DoS menu.
2. Check or uncheck individual option to enable or disable additional protection
against specific type of attack. Note that SYN flooding and ICMP verbose
attack protection are enabled by default. For information regarding specific
type of attack, please refer to Table 9.5 for details.
3. Click the
9.8
Firewall Policy List – (Firewall
Firewall policy list provides a convenient way to manage firewall ACL rules (inbound/outbound ACL rules, and
group ACL rules).
Application Filters – This option allows you to configure Command Filters for FTP, HTTP, RPC and
SMTP applications. Configure filters here before attaching them to policies.
IP Pools – This option allows you to configure logical names for IP Pools and set appropriate IP
addresses. Each record contains the name of the IP record and the types of IP address (single IP
address or a range of IP address or a subnet address).
NAT Pools – This option allows you to configure NAT Pools that will ensure mapping of the internal IP
address to public IP address. Configure NAT Pools here before attaching them to policies.
Time Ranges – This option allows you to configure time-windows for user-access to the networks
across the RX3041H.
68
Figure 9.16. DoS Attack Protection List
button to save the DoS settings.
Figure 9.17. DoS Configuration Page
Advanced
Policy List)
RX3041H User's Manual
Advertisement
Table of Contents
