Chapter 9. Configuring Firewall/NAT Settings
Figure 9.24. HTTP Filter Example – Associate HTTP Filter Rule to an ACL Rule
9.8.1.3
Modify an Application Filter
To modify an IP Pool, follow the instructions below:
1. Open the Application Filer configuration page by clicking the Firewall
Policy List
2. Select the application filter to modify. Click on the
application filter to be modified in the Application Filter List table or
select the filter type from the Filter Type drop-down list and then s
the filter rule from the Filter Rule drop-down.
3. Make desired changes to any or all of the following fields: Port n
logging option, etc.
Filter Rule drop-
down list
74
Application Filter menu.
Figure 9.25. Modify an Application Filter
HTTP filter drop-down list
icon of the
elect
umber,
Filter Type drop-down list
RX3041H User's Manual