Table of Contents
Advertisement
RX3041H User's Manual
4. Click on the
will then be displayed in the Application Filter List table.
9.8.1.4
Delete an Application Filter
To delete an Application Filter, click on the
1. Open the Application Filer configuration page by clicking the Firewall
Application Filter menu.
2. Select the application filter to delete. Click on the
the Application Filter List table or select the filter type from the Filter Type drop-down list and then
select the filter rule from the Filter Rule drop-down.
3. Click on the
9.8.2
Configuring IP Pool
9.8.2.1
IP Pool Configuration Parameters
Table 9.7 describes the configuration parameters available for an IP pool.
Field
IP Pool Name
IP Pool Type
IP Range
Start IP
End IP
Subnet
Subnet Address
Subnet Mask
IP Address
IP Address
9.8.2.2
Add an IP Pool
To add an IP Pool, follow the instructions below:
1. Open the IP Pool configuration page by clicking the Firewall
Policy List
2. Select "Add New Pool" from the IP Pool drop-down list.
3. Enter a pool name into the Name field.
4. Select a pool type from the IP Pool Type drop-down list.
5. If "IP Range" pool type is selected, enter start IP address and end IP
address. If "Subnet" pool type is selected, enter subnet address and subnet mask. If "IP Address"
pool type is selected, enter an IP adderss.
button to save the new settings. The new settings for this application filter
icon of the filter to be deleted or follow the instruction below:
button to delete this filter.
Table 9.7. IP Pool Configuration Parameters
Description
Enter the name of the local IP
Select the type of IP Pool.
This option allows you to configure the range of IP addresses.
Enter the starting IP address of the range.
Enter the ending IP address of the range.
This option allows you to include all the computers that are connected in an
IP subnet.
Enter the appropriate IP address.
Enter the corresponding mask.
This option allows you to configure single IP address.
Enter the IP Address.
IP Pool menu.
Chapter 9. Configuring Firewall/NAT Settings
Policy List
icon of the application filter to be deleted in
75
Advertisement
Table of Contents
