Table of Contents
Advertisement
RX3041H User's Manual
Field
HTTP DDNS Specific Settings
DDNS Service [For HTTP DDNS only]
zoneedit
dyn-tokyo
DDNS Username [For HTTP DDNS only]
Enter the username provided by your DDNS service provider in this field.
DDNS Password [For HTTP DDNS only]
Enter the password provided by your DDNS service provider in this field.
8.2
Configuring RFC-2136 DDNS Client
Follow these instructions to configure the RFC-2136 DDNS:
1. First, you need to ask your system administrator to turn on the DNS dynamic update functionality
on your DNS server. If you are running Windows 2000/XP/2003 DNS server, Please refer to the
Microsoft Knowledge Base article "Q317590: Configure DNS Dynamic Update in Windows 2000",
for details.
2. Make sure that you have a host name configured for the RX3041H;
otherwise, open the System Identity configuration page to configure one.
Please refer to the section 11.3 "Configure System Identity" for more details.
3. Open the DDNS configuration page by clicking on the DDNS menu.
4. Select "Enable" for the DDNS State and "RFC-2136 DDNS" for the DDNS
Type.
5. Enter the domain name in the DNS Zone Name field.
6. There is no need to change the settings for the primary and secondary DNS servers as they are
inherited from the settings in the WAN configuration page. Unless you want to change these
settings for WAN, leave them as they are.
7. Click on
Primary DNS and Secondary DNS fields. Note that DNS update request will also be sent to the
DNS Server automatically whenever the WAN port status is changed.
Description
dyndns
Please visit
http://www.dyndns.org
Please visit
http://www.zoneedit.com
Please visit
http://www.dns-tokyo.jp
Figure 8.3. RFC-2136 DDNS Configuration
button to send a DNS update request to the DNS server(s) as specified in the
Chapter 8. Configuring DDNS
for more details.
for more details.
for more details.
47
Advertisement
Table of Contents
