Table of Contents
Advertisement
RX3041H User's Manual
Private Network 192.168.1.0/24
Figure 10.7. Network Diagram for Inbound Remote Access
10.5 Configure Firewall for Remote Access
Remote Access is usually used to support mobile users of a company to access their corporate network
without compromising on security. The steps required for configuring the RX3041H for remote access is best
explained with an example. The following shows the steps required to configure the RX3041H for the remote
users, Richard and Gloria, to access the FTP server located in the protected network, i.e. corporate LAN.
Figure 10.7 shows the network diagram for this example.
1. Create remote access users and groups if necessary. Figure 10.8 illustrates the creation of a new
user, Gloria. For details on how to add new users and/or new user group for remote access,
please refer to section 10.2 Manage User Groups and Users.
Internet
WAN Port
61.222.32.38
ISR
LAN Port
192.168.1.1
Chapter 10. Configuring Remote Access
User Name: Richard
Group Name: RoadWarrior
User Name: Gloria
Group Name: RoadWarrior
FTP Server: 192.168.1.200
91
Advertisement
Table of Contents
