Quick Configuration of ASUS SL1200
This section gives instructions on logging into the Configuration Manager,
a preinstalled web-based program in the ASUS SL100. This section
also gives instructions on configuring the basic settings for your Internet
connection. Your ISP should provide you with the necessary information to
complete this step.
Buttons Used in Setup Wizard
The ASUS SL100 comes with a preinstalled software program called
Configuration Manager which enables you to configure the router via your
Web browser. The settings that you are most likely to need to change
before using the device are grouped into sequences of Configuration
pages guided by the Setup Wizard. The following table shows the buttons
that you will encounter in the Setup Wizard.
Setting up the ASUS SL1200
To set up the router
1. Before accessing the Configuration Manager in the router, make sure
that the HTTP proxy setting is disabled in your browser. In IE, click
Tools -> Internet Options -> Connections -> LAN settings and then
uncheck "Use proxy server for your LAN ..."
. On any PC connected to one of the four LAN ports on the router, open
your Web browser, and type the following URL in the address/location
box, and press <Enter>:
This is the predefined IP address for the LAN port on the router. A login
screen displays, as shown in Figure .
Click this button to save the information and proceed to
the next configuration page.
Click this button to go back to the previous configuration