Step 3. Attach The Ac Adapter; Step 4. Power On Rx3141, The Adsl Or Cable Modem And Power Up Your Computers; Figure 3.1. Overview Of Hardware Connections; Table 3.1. Led Indicators - Asus RX3141 User Manual

Chapter 3. Quick Start Guide
3.1.3

Step 3. Attach the AC adapter.

Attach the AC adapter to the POWER input jack on the back of the device and plug in the adapter to a wall
outlet or a power strip.
3.1.4 Step 4. Power on RX3141, the ADSL or cable modem and power up your
computers.
Plug the AC adapter to the power input jack of RX3141. Turn on your ADSL or cable modem. Turn on and
boot up your computer(s) and/or any LAN devices such as wireless AP, hubs or switches.
Ethernet
You should verify that the LEDs are illuminated as indicated in Table 3.1.
This LED:
POWER
1 – 4
STATUS
LED
WAN
If the LEDs illuminate as expected, the RX3141 is working properly.
12
Cable or ADSL Modem
RX3141i
cable
Wireless AP

Figure 3.1. Overview of Hardware Connections

Table 3.1. LED Indicators

...should be:
Solid green to indicate that the device is turned on. If this light
is not on, check if the AC adapter is attached to the RX3141
and if it is plugged into a power source.
Solid green to indicate that the device can communicate with
your LAN or flashing when the device is sending or receiving
data to/from your LAN computer(s).
Solid green to indicate that the device has successfully
established a connection with your ISP or flashing when the
device is sending or receiving data to/from the Internet.
RX3141 User's Manual
Internet