Basic Operation; I Power On; I Channel Selection - Icom IC-M45EURO Instruction Manual

Vhf marine transceiver
Hide thumbs Also See for IC-M45EURO:
Table of Contents

Advertisement

I Power ON

Rotate [PWR/VOL] clockwise to turn power ON.
All display indications
T X
BUSY
TAG DUAL
TRI
LOW CALL
SCAN
appear briefly.
CANUSA
DUP ACK RCV
INT
WX
ALT
Channel 16 is automatically
selected.
INT
Operate the transceiver as indicated in the following sec-
tions.
D Low voltage indicator
When "bAT" appears and flashes
as shown at right, there is a DC
power source problem. In this case,
check your vessel's battery and DC
power cable.

I Channel selection

D Channel 16
Channel 16 is the distress channel. It is used for establishing
initial contact with another station and for emergency com-
munications. Channel 16 is monitored during dual/tri-watch.
While standing by you are required to monitor channel 16.
D Call channel
The call channel is used to store your most often-used chan-
nel for quick recall. In addition, the call channel is monitored
during tri-watch. The default setting for the call channel is
channel 16* which is for leisure boat use. A separate call
USA
channel can be set for each channel group (USA and INT).
* The default call channel number is depends on version.

BASIC OPERATION

Push
Push
for 1 sec.
3
INT
CALL
USA
"CALL" indicates that the
call channel is selected.
5

Advertisement

Table of Contents
loading

Table of Contents