Table of Contents
Advertisement
3
BASIC OPERATION
I Call channel programming
Pushing [16 •
] for 1 sec. selects the call channel, channel
C
16 by default, however you can program your most often-
used channels in each channel group for quick recall.
➀
Push [16 •
] for 1 sec. to se-
C
lect the call channel of the se-
lected group.
• "CALL" and the call channel
number appear.
➁
Push [16 •
] for 3 sec. to
C
enter call channel write mode.
• Call channel and channel group
to be programmed flash.
➂
Push [UP] or [DN] to select
the desired channel.
➃
Push any switch to automati-
cally program the selected
channel.
• The transceiver returns to nor-
mal operation.
10
I Display backlighting
The function display and switches can be backlit for better
visibility under low light conditions.
While pushing [H/L •
backlighting.
USA
• Backlighting can be set to 1 of 4 intensities or turned OFF.
TAG
CALL
USA
CALL
USA
CALL
USA
CALL
USA
], push [UP] or [DN] to adjust the
DIM
Advertisement
Table of Contents
