Setting The Midi Transmit Receive Channels - Roland HP 3800 Owner's Manual

e Connecting a MIDI sound source
-MIDI Sound Source
HP3800/2800.. m ae Se
* Connecting an MT-200
_____ Roland MT-200
HP3800/2800
e Connecting a MIDI Sequencer and MIDI Sound Source
MIDI Sequencer _ MIDI Sound Source
Setting the MIDI Transmit/Receive Channels
MIDI allows you to play sounds on an external unit, or change the sounds used (only if
the channels (Numbered 1-16) on the transmitter and receiver match).
To match transmission and reception channels:
Press the FUNCTION button (the indicators on the TRACK 1 and TRACK 2 but-
tons should both light). If only one of them is lit, hold down the FUNCTION
button while you press both buttons.
While holding down the FUNCTION button, press the key that corresponds to
the desired MIDI channel.
FUNCTION
While holding
Press the key that corresponds
to the MIDI channel you want