Electrolux EOC66700 User Manual page 6

6 electrolux
"On / Off" touch control
The oven must be switched on before setting
any cooking functions or programmes. After
the touch control
shows the oven symbol and the oven light
switches on.
To switch off the oven, touch control
cooking function or programme will stop, the
oven light will switch off and the time display
will show the time of day only.
It is possible to switch off the oven at any
time.
How to select a cooking function
1. Switch on the oven by touching control
.
2. Touch control
oven function. Each time the control
touched, the display shows a cooking
symbol and the corresponding cooking
function number appears on the left of the
currently selected cooking function sym-
bol.
is touched, the display
. Any
to select the required
3. If the pre-set temperature is not suitable,
touch control "
correct temperature. The temperature is
adjusted in 5 degree steps.
– As soon as the oven heats up, the ther-
mometer symbol rises slowly indicating
the degree to which the oven is currently
heated.
When the required temperature is
reached, an acoustic signal sounds and
the thermometer symbol lights up.
Setting the temperature and cooking
time
Touch control "
decrease the pre-set temperature while the
" ° " symbol is flashing. The maximum tem-
perature is 250°C.
Touch control "
decrease the pre-set cooking time while the
symbol flashes.
Safety thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power sup-
ply. The oven switches back on again auto-
is
matically, when the temperature drops.
Should the safety thermostat trigger due to
incorrect use of the appliance, simply remedy
the error after the oven has cooled down. If,
on the other hand, the thermostat triggers
because of a defective component, please
contact Customer service.
" or " " to set the
" and " " to increase or
" and " " to increase or