Table of Contents
Advertisement
3. When you choose the desired pyrolytic
function, Pyro will flash on the display
waiting for confirmation to start the pyro-
lytic cleaning function.
4. To confirm the desired pyrolytic cleaning
function, touch control
flashing on the display, the symbol
disappears and the acoustic signal stops.
The oven lamp switches off and the py-
rolytic cleaning cycle starts.
As soon as the oven heats up, the ther-
mometer symbol rises slowly , indicating
that the temperature inside the oven is
increasing. .
To programme the pyrolytic cleaning
cycle (delayed start, automatic stop)
If you desire, you can programme the starting
and ending time of the pyrolytic cleaning cy-
cle.
1. Touch control
Touch control
Pyro function symbol
appears on the display.
The symbol
will flash on the display at the same time
and an acoustic signal will sound.
This means that, before activating the py-
rolytic cleaning function, you have to re-
move all the oven accessories and the
side rails from the oven cavity (see the
previous chapter).
. Pyro stops
to switch on the oven.
repeatedly, until the
(level 1 - P I)
and the indicator Pyro
2. The Cooking Time symbol
for some seconds; during this time touch
'
' or '
' controls to select the py-
rolytic 1 (P I) or pyrolytic 2 (P 2) function.
3. When you choose the desired pyrolytic
function, Pyro will flash on the display
waiting for confirmation to start the pyro-
lytic cleaning function.
At this time, touch the time function con-
trol
.
"The End of Cooking" symbol
the arrow symbol
panel, the cleaning cycle (that is the ac-
tual time + cooking time) is displayed.
Touch the '
' or '
the required end of cycle time. After a few
seconds, the word Pyro and the symbol
will stop flashing, the acoustic signal
will stop. The Cooking time symbol
will flash until the pyrolytic cleaning cycle
starts.
4. After some time the door lock will be Ac-
tivated and the respective symbol
be displayed.
After ending the pyrolytic cleaning process,
the display shows the time of day. The oven
door is still locked.
Once the oven is cooled down, an acoustic
signal sounds and the symbol
pears. The oven door are unlocked.
To stop the pyrolytic cleaning cycle at any
time; touch the control
electrolux 19
will flash
and
flash. On the control
' controls to select
will
disap-
.
Advertisement
Table of Contents
