• Sponge 150
For absorbing residual water from the
• Core Temperature Sensor
To measure how far the food is cooked.
BEFORE FIRST USE
Refer to "Safety information" chapter.
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
First connection to the mains
After first connection to the mains all symbols in the display are on for some seconds.
For the subsequent few seconds the display shows software version.
First setting the time of day
After the software version goes off, the display shows "h" and "12:00".
Setting the time of day:
The Temperature/Time display shows new time.
Changing the time of day
You can change the time of day only if the appliance is off.
to set hours.
to set minutes.
flashes in the display. To set new time of day use the above procedure.
Before first use