The appliance has same features that help you save energy during everyday cooking:
• Residual heat:
– the oven function or programme operates: the heating elements are deactivated
10% time earlier (the lamp and fan continue to operate). The condition: the cook-
ing time is longer then 30 minutes or you use the clock functions (Duration, End,
– the oven is off: you can use the heat to keep the food warm. The indication: the clock/
Residual heat display shows the remaining temperature, the bars show the decreas-
• Oven lamp off - touch
• Display off - if necessary, deactivate the appliance. Touch
time until the display goes out (or on).
• Eco functions - refer to "Oven function".
Count Up Timer
Use the Count Up Timer to monitor how long the appliance operates. It is on immediate-
ly when the appliance starts to heat.
Reset the Count Up Timer: touch
until the display shows "00:00" and the Count Up Timer starts to count up again.
You can not use Count Up Timer when Duration or End is set.
Setting the DURATION
1. Activate the appliance and set an oven function and temperature.
to deactivate the oven lamp during cooking;
COUNT UP TIMER
TIME OF DAY
To set count up. It shows how long the appliance operates.
This function has no effect on the operation of the appliance.
To examine the time of day. For changing the time of day
refer to 'Setting the time of day'.
To set how long the appliance operates.
To set when the appliance deactivates. You can use Duration
and End at the same time (Time delay), if the appliance is to
be activate and deactivate automatically later.
To start the appliance with necessary settings with only one
touch of the sensor field, any time later.
again and again until
at the same
flashes in the display.