Table of Contents
Advertisement
1.
Remove the battery cover on the back of the IR Remote Control Unit.
2.
Insert the included battery into the open battery slot. The positive (+) side of
the battery should be facing up.
3.
Replace the battery cover.
The Remote Control unit ships with two batteries. One battery is required for
operation and the other battery is a spare.
WARNING: Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions.
IR REMOTE CONTROL UNIT
Installing the Battery
Battery Slot
9
Advertisement
Table of Contents
Need help?
Do you have a question about the 4x1 DVI Switcher and is the answer not in the manual?